LaptopCircle is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission at no extra cost to you. Learn more.

How To Fix Broken Laptop Charger Tip? {The Easiest Way}

Charger tips are more susceptible to damages because of frequent use. Most people charge their laptops at least twice a day, and the charger tip is the device that links the adapter with the laptop. So, if the charger tip is not in great shape, your laptop will not charge, or you will have a hard time charging it. So, have you realized that your charger tip is broken and wondering if it is possible to fix it? If yes, then you have clicked the right page. In this guide, we will discuss how to fix a broken charger laptop tip.

Can you fix a broken charger laptop tip?

Before we even discuss how to fix a broken laptop charger tip, the first important question that we need to answer is whether it is possible to fix a broken tip of a laptop charger? The answer is YES; a broken laptop charger tip can be fixed even without the help of an expert. Most people usually replace their laptop adapters when the charger laptop tips break down. However, you can save that money by fixing the broken charger tip on your own at home. The process is simple and straightforward and can be done by anyone, including those who lack experience.

Remember: You can even charge your laptop without a charger or if your laptop has an HDMI port, you can charge a laptop with an HDMI cable too!

How do you fix a broken laptop charger pin?

As said earlier, fixing a broken laptop charger pin is a simple process that will take you a few minutes to complete. Below is a simple process of how to fix a broken laptop charger pin.

Step 1: Purchase a replacement tip

The first crucial thing to do when fixing a broken charger tip is to replace the broken tip with a new one. Go to the nearest dealer that sells laptop spare parts and purchase a new charger tip for your laptop charger. Make sure the new tip is exactly the same as the one you are replacing. If you don’t purchase the right tip, it will not be compatible with your laptop charger. If you have an old charger with a pin similar to your charger tip, you can use it instead of purchasing a new one.

Step 2: Cut the tip of the broken charger

Once you have a replacement of the broken charger tip, the next process is to cut the tip of the old charger using a plier or a sharp knife. Cut it gently to prevent damaging the wires. Cut it precisely and make sure there is enough room to work with the inner wires.

Step 3: Replace the broken tip with a new pin

Once you have removed the broken charger pin, the next step is to replace it with a new tip. This process is simple. First, mark the wires. When replacing the tip, it is crucial to match the wires correctly. Most laptop chargers have three wires: positive, negative, and neutral. Ensure that you replace them correctly. Connect the wires, then wrap them with insulation tape to prevent short-circuiting the connection.

Step 4: Plug in the charger

Once you are done, plug in the charger to see if it is working. If your laptop starts to charge, then that means that the repair was successful. If it is not working, there could be a problem with the connection. Check the wires again to see if they are well connected and insulated.

How do you remove a laptop charger tip?

Removing a broken charger tip is simple. The only tool you need is a plier. Hold the broken laptop charger firmly on the table, then use the pliers to cut the broken charger tip. Cutting the broken charger tip using a plier is highly recommended because it cuts precisely without damaging the wires. This makes it easier to fix a new pin. If you don’t have a plier, you can use a sharp knife to remove the broken laptop charger tip.

How do you fix a broken charger cable?

The laptop charger cable may be broken as a result of many reasons, including constant wear and tear, old age, and much more. However, just because your charger is broken does not mean that you throw it away. You can fix the broken and still use the cable. Below is a step-by-step process on how to fix a broken charger cable.

Step 1: Identify the broken part

The first process of fixing a broken laptop charger cable is to identify the broken part. For instance, locate the exact point where the wire is broken if the charger cable has malfunctioned because of a broken wire.

Step 2: Remove the broken part

Once you have identified the broken or damaged part of the cable, the next step is to remove that part. For instance, if it is a broken wire, cut the broken part precisely with a plier.

Step 3: Fix the cable

Once you have removed the broken part, fix the cable by reconnecting it. Again, ensure that you fix the wire correctly. If the cable is too short, look for an extension but ensure that it matches the layout of your charger cable. Use duct tape to insulate the cable.

Step 4: Test the charger cable

Once you have fixed the cable, test it to see if it is working. If your laptop starts to charge when you plug in the charger cable, then the problem is fixed. If it is not working, check the connection again and fix where the problem is.

Is it safe to use a bent laptop charger?

NO, it is not safe to use a bent laptop charge. The fact that it is damaged means that something is not right, and it is just a matter of time before things get worse. For instance, a bent laptop charger may short circuit, thus damaging the entire cable when naked wires come into contact. Therefore, if your laptop cable is bent, don’t just ignore it; instead, inspect to find where the problem is and fix it.

Final thoughts

If your charger tip is damaged or broken, don’t throw it because it can be fixed. A broken laptop charger tip can be fixed by following a few steps listed above. However, ensure that the connection is done properly when fixing the pin. Also, don’t forget to insulate all naked wires using duct tape to prevent short-circuiting the cable.

We will be happy to hear your thoughts

Leave a reply

Laptop Circle